Terms of Use

These Terms of Use (“Terms”) govern your access to and use of the website located at agilitymarine.com (the “Website”), which is owned and operated by Agility Marine Technology, a company registered in Shanghai, China, with its registered office at R4127,Bldg 1, No.63 Liantai Rd, Baoshan District,Shanghai,China (“Company,” “we,” “us,” or “our”).

By accessing or using this Website, you acknowledge that you have read, understood, and agreed to be bound by these Terms. If you do not agree with these Terms, you should not access or use the Website.

1. About Our Website

The Website provides general information about our marine engineering and project support capabilities, which may include:

Ship retrofit and conversion design;
Mooring analysis and related engineering studies;
LNG and alternative fuel engineering;
Heavy marine transportation engineering;
Shipyard and site support services;
Marine structures and equipment engineering;
Technical consultancy, design review and project support; and
Other related marine, offshore and shipbuilding services.

The information presented on this Website is provided for general informational and business communication purposes only.

Nothing on this Website constitutes a binding offer, engineering instruction, design approval, certification, warranty, or commitment to provide any particular service.

2. No Professional or Engineering Advice

The content available on this Website does not constitute engineering, naval architecture, marine warranty, classification, regulatory, legal, financial, safety, or other professional advice.

Marine engineering decisions must be based on project-specific information, including, where applicable:

Vessel particulars;
Site and environmental conditions;
Operational requirements;
Load cases and design criteria;
Applicable laws and regulations;
Flag-state and port-state requirements;
Classification society rules;
Shipyard and equipment supplier information;
Survey and inspection results; and
Client-approved technical specifications.

You must not rely solely on information published on this Website to make engineering, operational, investment, procurement, transportation, installation, safety, or compliance decisions.

No engineer-client, consultant-client, contractor-client, or other professional relationship is created merely by accessing this Website, downloading materials, sending us an enquiry, or communicating with us through a Website form.

A professional relationship will arise only after the relevant parties enter into a separate written agreement, purchase order, consultancy agreement, or other formally accepted contractual document.

3. Project Enquiries and Quotations

You may use the Website to request information, submit an enquiry, or ask for a quotation. Submitting an enquiry does not require us to accept a project or provide services.

Any preliminary response, budget estimate, availability statement, schedule indication, technical observation, or quotation provided before execution of a formal agreement is subject to:

Review of the complete project information;
Confirmation of the project scope;
Technical feasibility assessment;
Availability of personnel and resources;
Commercial and contractual agreement;
Compliance and conflict checks; and
Applicable regulatory, export-control and sanctions requirements.

Unless expressly stated otherwise in writing, quotations may be subject to revision if the project scope, design basis, vessel particulars, site conditions, schedule, regulatory requirements, classification requirements, or information supplied by the client changes.

If there is any conflict between these Website Terms and a signed service agreement, consultancy agreement, purchase order, proposal, quotation, or project-specific terms accepted by both parties, the project-specific agreement will prevail in relation to that project.

4. Accuracy and Availability of Information

We make reasonable efforts to keep the information on the Website accurate and up to date. However, marine engineering standards, classification rules, regulatory requirements, technology, project experience, personnel availability, and service capabilities may change over time.

We do not guarantee that:

All Website information is complete, accurate, current, or suitable for a particular project;
Every service described on the Website is available in every country or region;
All project descriptions remain representative of our current capabilities;
The Website will operate without interruption or error;
Files available through the Website will be free from viruses or harmful code; or
Any enquiry will receive a response within a specific period.

We reserve the right to correct, update, remove, suspend, or modify Website content at any time without prior notice.

5. Classification, Flag-State and Regulatory Approval

Unless expressly agreed in a separate written contract, our services do not constitute approval, certification, verification, inspection, endorsement, or acceptance by any:

Classification society;
Flag-state authority;
Port-state authority;
Maritime administration;
Government agency;
Marine warranty surveyor;
Insurer;
Shipowner;
Charterer;
Shipyard; or
Other regulatory or commercial authority.

Any references to classification society rules, maritime regulations, industry codes, technical standards, or recommended practices are for informational purposes only unless expressly incorporated into a project-specific agreement.

The client or project owner remains responsible for obtaining all necessary approvals, certificates, permits, reviews, surveys, and authorisations unless a written project agreement specifically assigns such responsibility to us.

6. Client and User Responsibilities

When contacting us or submitting information through the Website, you agree to provide information that is accurate, current, lawful, and not misleading.

For any potential or confirmed project, engineering results may depend on the quality and completeness of information supplied by the client and other project participants.

You are responsible for ensuring that:

You have authority to submit the relevant information;
Submitted drawings, data, photographs, reports, specifications, and documents are accurate;
You have permission to share any confidential or third-party materials;
Submitted materials do not infringe intellectual property or privacy rights;
Relevant changes to project information are communicated promptly; and
Information received from us is reviewed by appropriately qualified personnel before implementation or operational use.

We are not responsible for consequences resulting from incomplete, inaccurate, outdated, inconsistent, or misleading information supplied by a user, client, shipowner, shipyard, vendor, subcontractor, or other third party, subject always to the terms of any separate written project agreement.

7. Permitted Use

You may use the Website only for lawful business and informational purposes.

You may view, download, or print reasonable portions of the Website for your internal, non-commercial evaluation of our services, provided that you do not remove any copyright, trademark, confidentiality, or proprietary notices.

No other rights are granted except as expressly stated in these Terms.

8. Prohibited Use

You must not:

Use the Website for any unlawful, fraudulent, deceptive, or harmful purpose;
Attempt to gain unauthorised access to the Website, server, database, email system, or connected systems;
Introduce malware, viruses, ransomware, malicious code, or other harmful technology;
Interfere with the security, availability, or operation of the Website;
Scrape, crawl, extract, harvest, or systematically collect Website content or data without written permission;
Copy, reproduce, republish, distribute, sell, license, or commercially exploit Website content without written permission;
Reverse engineer or attempt to extract Website source code, except where permitted by law;
Misrepresent your identity, company, authority, project, or intended use of our services;
Submit confidential or personal information that you are not authorised to disclose;
Use our company name, trademarks, project information, personnel profiles, or materials in a misleading manner;
Use Website content as a substitute for project-specific engineering analysis;
Use information from the Website to create unsafe engineering instructions or operational procedures; or
Use the Website in violation of applicable sanctions, export controls, anti-bribery, anti-corruption, or trade compliance laws.

We may restrict or block access to the Website if we reasonably believe that these Terms have been violated.

9. Intellectual Property Rights

Unless otherwise stated, the Website and its contents are owned by or licensed to [Full Legal Company Name].

Protected content may include:

Text;
Logos and trademarks;
Graphics and illustrations;
Photographs and videos;
Page layouts;
Technical descriptions;
Diagrams and drawings;
Project descriptions;
Case studies;
Reports and publications;
Software and source code; and
Downloadable documents.

Website content is protected by applicable copyright, trademark, database, and other intellectual property laws.

You may not reproduce, modify, adapt, distribute, publish, display, transmit, sell, license, create derivative works from, or commercially use our Website content without our prior written consent.

Downloading or viewing Website content does not transfer ownership or intellectual property rights to you.

Any intellectual property rights relating to project-specific drawings, calculations, reports, software, models, specifications, deliverables, or background technology will be governed by the applicable project agreement and are not determined by these Website Terms.

10. Project Information and Case Studies

The Website may include descriptions, images, or summaries of previous projects, sectors, vessels, shipyards, operations, or engineering assignments.

Unless expressly stated otherwise:

Such information is provided only to demonstrate general experience or capability;
Project details may have been simplified, anonymised, adapted, or omitted for confidentiality;
Images may be illustrative rather than images of the exact project described;
Past project experience does not guarantee the same outcome for another project; and
Each project remains subject to its own technical, operational, commercial, regulatory, and environmental conditions.

The appearance of a client name, vessel name, shipyard name, equipment brand, classification society, or third-party trademark does not necessarily imply endorsement, partnership, certification, or continuing commercial affiliation.

11. Information You Submit

If you submit an enquiry, document, drawing, specification, photograph, or other material through the Website or by email, you confirm that:

You are authorised to provide the material;
The submission does not violate any law or contractual obligation;
The submission does not infringe any third-party rights; and
We may use the submitted information to review and respond to your enquiry.

Submitting information through a general Website form does not automatically create a confidentiality obligation beyond any obligation imposed by applicable law.

You should not submit highly sensitive, classified, export-controlled, commercially critical, or confidential project information through a general Website contact form.

Where confidential information needs to be exchanged, the parties should first enter into an appropriate non-disclosure agreement or use an agreed secure file-transfer method.

Our handling of personal information is further described in our [Privacy Policy]([Privacy Policy URL]).

12. Confidentiality

Information displayed publicly on the Website should not be considered confidential.

Any confidentiality obligations relating to a project, proposal, client, vessel, shipyard, technical design, commercial arrangement, or other business information must be established in a separate written non-disclosure agreement or project agreement.

We will take reasonable measures to protect information submitted to us. However, no method of electronic transmission or storage is completely secure, and we cannot guarantee the absolute security of information transmitted through the Website or by email.

13. Third-Party Websites and Services

The Website may contain links to third-party websites, software, maps, videos, classification resources, regulatory sources, social media platforms, or other services.

These links are provided for convenience only. We do not control and are not responsible for:

Third-party content;
Accuracy or availability;
Security practices;
Privacy practices;
Products or services;
Terms and conditions; or
Any loss resulting from your use of a third-party website or service.

A link does not necessarily indicate our endorsement, approval, partnership, or affiliation with the third party.

You should review the terms and privacy policies of any third-party website you visit.

14. Compliance, Sanctions and Export Controls

Access to our Website and services may be subject to applicable laws concerning:

International trade sanctions;
Export controls;
Import restrictions;
Anti-money laundering;
Anti-bribery and anti-corruption;
Maritime security;
Vessel ownership and control;
Restricted parties; and
Restricted countries, territories, goods, technology, or end uses.

You must not use the Website or request services in a way that would cause us or any other person to violate applicable law.

We reserve the right to refuse or discontinue communications or potential services where necessary to comply with legal, regulatory, ethical, insurance, security, or internal compliance requirements.

15. Health, Safety and Site Activities

Information on this Website concerning shipyard attendance, onboard attendance, surveys, inspections, installation support, commissioning support, or other site activities is general in nature.

All site work is subject to:

A separate agreed scope of work;
Site access approval;
Vessel and shipyard rules;
Applicable health and safety requirements;
Permit-to-work procedures;
Risk assessments and method statements, where applicable;
Appropriate inductions and personal protective equipment;
Travel and immigration requirements;
Environmental and weather conditions; and
Our personnel’s right to suspend or refuse unsafe work.

Nothing on the Website should be interpreted as an agreement to perform work in unsafe, unlawful, inaccessible, or unsuitable conditions.

16. Disclaimer of Warranties

To the fullest extent permitted by applicable law, the Website and its contents are provided on an “as is” and “as available” basis.

We disclaim all express and implied warranties relating to the Website, including warranties of:

Accuracy;
Completeness;
Currency;
Merchantability;
Fitness for a particular purpose;
Non-infringement;
Availability;
Security; and
Suitability for a particular engineering or operational application.

Nothing in this section excludes warranties or responsibilities that cannot legally be excluded.

Any warranties relating to paid professional services must be expressly stated in the applicable written project agreement.

17. Limitation of Liability

To the fullest extent permitted by applicable law, [Full Legal Company Name], its directors, officers, employees, consultants, representatives, affiliates, and service providers will not be liable for any loss arising from or relating to:

Access to or use of the Website;
Inability to access or use the Website;
Reliance on Website information;
Errors or omissions in Website content;
Third-party websites or services;
Loss or unauthorised disclosure of information transmitted electronically;
Viruses, malware, cyber incidents, or technical failures; or
Decisions made without project-specific professional advice.

We will not be liable for indirect, incidental, special, punitive, or consequential loss, including loss of profit, revenue, production, use, opportunity, contract, data, goodwill, or anticipated savings, arising from the use of the Website.

Nothing in these Terms excludes or limits liability for fraud, fraudulent misrepresentation, death or personal injury caused by negligence, or any other liability that cannot be excluded under applicable law.

Liability relating to professional engineering services or project deliverables will be governed exclusively by the applicable written project agreement.

18. Indemnification

To the extent permitted by applicable law, you agree to indemnify and hold harmless [Full Legal Company Name], its directors, officers, employees, consultants, affiliates, and representatives from claims, losses, liabilities, damages, and reasonable costs arising from:

Your unlawful or unauthorised use of the Website;
Your material breach of these Terms;
Information or materials you submit without proper authority;
Your infringement of third-party intellectual property, privacy, or confidentiality rights; or
Your misuse of Website content as engineering or operational instructions.

This section does not apply to the extent that a claim results from our own liability that cannot legally be excluded or limited.

19. Privacy and Cookies

Our collection and use of personal information are governed by our [Privacy Policy]([Privacy Policy URL]).

The Website may use essential, analytics, functionality, or marketing cookies. Where required by applicable law, non-essential cookies will be used only after the necessary consent has been obtained.

For more information, please review our [Cookie Policy]([Cookie Policy URL]), if applicable.

20. Suspension and Termination

We may suspend, restrict, or terminate access to all or part of the Website where reasonably necessary, including for:

Maintenance or technical updates;
Security concerns;
Suspected unlawful activity;
Breach of these Terms;
Protection of our systems or intellectual property; or
Legal or regulatory compliance.

Provisions that by their nature should survive termination—including intellectual property, disclaimers, limitation of liability, indemnification, and governing law—will remain in effect.

21. Changes to These Terms

We may update these Terms periodically to reflect changes to:

Our Website;
Our services;
Applicable law;
Regulatory requirements;
Security practices; or
Business operations.

The revised Terms will be published on this page with an updated “Last Updated” date.

Your continued use of the Website after revised Terms are published constitutes acceptance of the updated Terms, to the extent permitted by applicable law.

22. Governing Law and Jurisdiction

These Terms and any dispute arising from or relating to the Website are governed by the laws of [Country/State/Jurisdiction], without regard to its conflict-of-law principles.

Subject to any rights that cannot legally be excluded, the courts of [City, Country/Jurisdiction] will have exclusive jurisdiction over disputes relating to these Terms or the use of the Website.

Project-specific disputes will be governed by the dispute-resolution provisions contained in the relevant project agreement, quotation, purchase order, or consultancy contract.

23. Severability

If any provision of these Terms is found to be invalid, unlawful, or unenforceable, that provision will be limited or removed to the minimum extent necessary. The remaining provisions will continue in full force and effect.

24. No Waiver

Our failure to enforce any provision of these Terms does not constitute a waiver of that provision or of our right to enforce it later.

25. Entire Agreement

These Terms, together with our Privacy Policy and any other legal notices expressly incorporated by reference, constitute the agreement between you and us concerning use of the Website.

They do not replace or modify any separately executed confidentiality agreement, quotation, purchase order, consultancy agreement, framework agreement, or project contract.